470 ml size is also available in US Gal (3.7 litre - 7.5 bottles)

• removes 1500-3200 grit sand scratches
•  surface shining like it was wet in one step.
• silicone free means you get true results, what you see is what you get even after weeks of washing this is a true polish that prepares any paint for the perfect sealant.
• works great as a final step product that produces an exceptional shine.
• while it has 1500 grit beads in the content they reduce very quickly to 3200 grit and because the product has sealant and gloss enhancers it is a very light cutting product. This makes it safer to use by the begginer as there is less chance of over cutting the paint.
• rapidly removes light scratches, key scratches, and most mild imperfections
• brings back that showroom shine.
• superior surface cleaner coupled with shining agents and enhanced with our unique no wax synthetic sealant.
• body shop safe, premium gloss & shine after water sanding
• will remove: oxidation, light scratches, scuff marks, minor swirls, old wax, and other surface blemishes; leaving a beautiful and deep acrylic shine.
• silicone free means you get true results, what you see is what you get even after weeks of washing this is a true polish.
• exfoliates impurities, bringing out your paints maximum shine, minimizes scratches and swirls and dissolves water spots while leaving the surface mirror smooth and reflective.
• What pad should I use?

  

  Orange Light Cutting Pad-This firm, high density foam is ideal for scratch and defect removal. The orange foam offers the correction of a typical compounding pad whilst at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds it will remove moderate swirls and scratches with little or no haze. It s an all around pad that will work on most light to moderate imperfections.

  Lake Countries CCS Technology revolutionize foam buffing pads. The patented Collapsed Cell Structure Technology is the result of many years research and development by Lake Country manufacturing.

  Tested an approved at OEM levels, these pads using strategic patterns of partially closed cells reduce the rate of polish absorption, improves operator control whilst at the same time reducing heat.

Abrasive Meter

         IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

LIght                               Medium                       Heavy Duty

APPLICATION TIPS:

All-In-1  is excellent for hand polishing applications, or it can be used effectively with a high speed or orbital buffer.

Hand Application

1. For best results use out of direct sunlight.  Bright light and direct sunlight will reflect off of the surface glaring your vision and not allow for optimal view of scratches and swirls.

2. Using a clean terry towel or microfiber applicator pad or towel, apply a quarter size amount of product..

3. Work in small areas, applying using a small circular motion.

4. Rub until dry. Buff away excess product. Repeat as necessary.
    

Machine Application:

1. Select the best  polishing pad to be used with your buffer. (preferably a new or clean one)

2. Apply enough polish to work 2'(foot) by 2'(foot) area..

3. Apply polish to affected area using light to medium even pressure until nearly dry.

Allow polish to dry, then buff to a deep gloss.

After Polish:

1. All-In-One will is formulated to protect and clean in one easy step

2. Remember for optimal protection and durability  follow all polish with a wax or paint sealant.

3. Though Extreme All-In-1  will outshine most waxes it does not contain any waxes, or silicones.

4. For the perfect finish we suggest following a great All-In-1 Polish with a finishing Polish. FP-Finishing polish that will leave any surface screaming with shine!