CHEMICAL GUYS HELPER INFORMATION:

WHAT PRODUCTS DO THE PROS USE TO CLEAN ARE REVIVE PAINT?

Your vehicles exterior its outermost covering is constantly fighting a war against contamination, oxidation, heat deterioration, scratches, grime, dirt etc…. . Often times to remove dirty, people rub rough towels against vehicles paint as a quick way to shine the vehicle, all this will do is damage the surface and often times scratch the paint. If you rub a dirty surface, or you hit it with something or rub something rough on it, it will scratch. Tiny scratches, scuff marks and swirls are like scars on your paint. The more scuff marks, scratches, and oxidation you have on the surface of your vehicles the more it will dull and limit its shine and protection.

Compounds, Polishes and Swirl Removers are all very similar in that there mail purpose is to remove these small flaws and imperfections in your vehicles surface and leave behind a clean shiny surface that is glaze, wax or sealant ready.

Compounds Polishes and swirl removers all contain tiny particles of different grits or “ sizes”  that dull the sharp edges of scratches and swirls in an attempt of  removing the scratch or dulling the angle which in turn reflects light differently and makes the scratch less apparent. .

Most scratches occur in the same way when an outside object is thrown or dragged across the surface cutting into the paint and leaving behind jagged or sharp edges in the clear coat. Because the edges are so sharp and your vehicles paint is so smooth the scratches become most apparent when light catches on the rough edges of the scratch.

Compounds, polishes, and swirl/scratch removers come in different grits such that the professional can choose the most suitable strength or cutting ability of the grit.  Compounds are labeled accordingly Heavy Duty, Medium, Light and Ultra Light depending on the size of the grit.  The larger the Grit it the stronger the products ability is to clean and or wear down the edges so the swirl or scratch.

Compounds, polishes, and swirl/scratch removers are not only for scratches but can also be used for old and dulling paint to remove the burn or damaged layer or can be used to remove orange peal and oxidation as well.

WHAT IF I NEED A COMPOUND THAT IS BODY SHOP SAFE AND DOES NOT CONTAIN ANY SILICONES?

Chemical Guys offers a complete line of :

BODY SHOP SAFE SILICONE FREE PRODUCTS.

Chemical Guys Diamond Cut Line:

Diamond Cut Compounds  are a part of a complete finishing system that ranges from compounds through paint protecting products. All Chemical Guys products are designed with the needs of their customers as the first priority. As a result you will find Diamond Cut Compounds extremely user-friendly. Crystalline gloss will be obtained without the headaches of dust, slinging, sticking or gummed up/blocked pads. The speed of Diamond Cut Compounds is impressive: it cuts quickly leaving a high gloss shine.. Clean-up is fast because it rinses off easily with water or a clean towel and its dust free removal minimizes shop contamination. The entire Diamond Cut Line of  Compounds was developed to work well on single- stage urethane, clear coated vehicles and all types of clear coat finishes.

1. DIAMOND CUT 2000-LIght Duty Cut 1700-2000 Grit sand scratches

2. DIAMOND CUT 1500-Medium Duty Cut 1200-1500 Grit sand scratches

3. DIAMOND CUT 1000-Heavy Duty Cut 800-1000 Grit and scratches

FOR PROFESSIONAL USE ONLY:

Chemical Guys knows that oxidation, scratches, scuff marks and orange peal can come in different levels of severity, so we offer professionals a large variety of products to assist them in delivering a professional result no matter what.  

Chemical guys offers:

Polishes:

PRO-POLISH- Foam Pad Polish+Gloss Enhancer -Hand or Buffer Applied Silicone Free Final cut polish. Dual Action Cleaner/Polish.

Insta Cut Polish 15+Gloss Enhancer - Hand or Buffer Applied Silicone Free Final cut polish. The crème form of this product makes it easy to use by hand or with a machine. A professional-grade product, it should be used with caution by novices. Used properly, it is safe for all solid, metallic and clear coat finishes. Once you have addressed the problem area(s) with the CG Compounds, you must complete the process by following up with Scratch & Swirl Mark Remover or if swirls are “hardly noticeable” or “ not noticeable” follow CGC with PRO-POLISH Foam Pad Polish+Gloss Enhancer, then seal and protect it with your favorite wax or sealant.

1.         PRO-POLISH- - Final step for hard to see and very thin extremely light scratches.

2.         Scratch & Swirl Remover - Minor scratches, swirls, water spots and oxidation are vanquished, delivering a flawless, deep wet-looking shine

3.         Diamond Cut 2000

4.         Diamond Cut 1500

5.         Diamond Cut 1000

Method of Application:

Apply: By hand or with buffer.

All Chemical Guys Products are uniquely formulated and engineered to deliver spectacular results even out under the sun. The premium blend of only top quality raw chemicals means that no Chemical Guys product will become hard to work with or impossible to remove.  Because Chemical Guys believes that professionals deserve professional quality products that are the easiest to use, highly effective and deliver the best results.

If applying with buffer:

Use a white polishing pad or for added cleaning ability step up to an orange light cutting pad.

DIRECTIONS FOR COMPLETE SCRATCH OR SWIRL REMOVAL:

1.         Wash Vehicle –Citrus Wash & Gloss - ideal because of its high lubricity formula

2.         Clay Surface- Even if you are using a compound it is always best to remove as much surface contamination before using a buffer or compounds.

3.         Survey the Job- Select the best chemicals to deliver the desired effect.  If paint is contaminated use a clay.  If it is dull or oxidized you may want a compound. Some paints may simply require a quick cleaning product like Revive Glaze. While newer paints may simply need a good sealant like Crystal Glaze or a Premium wax like Carnauba.  All surfaces should be sealed to achieve the maximum protection for months instead of days or weeks.

4.         Selecting a Compound:

Always feel the surface and chose the best compound or polish for the job.  It is always best to start with a lighter compound then a heavier duty and work your way up if needed.  If using a high speed buffer star with the lightest duty compound first. The weight of the buffer and the speed/ RPM (Revolutions per minute) often time swill increase the strength of products.

PRO-POLISH- - Final step for hard to see and very thin extremely light scratches.

5.         Glaze or Wax: select the bet product to achieve the optimal desired results.  If step “4” achieves a desired result it can be followed with a premium wax or glaze to achieve optimal shine, and brilliance.  If applying by hand Wax’s tend to deliver a deeper wetter look and are always easy on easy off, even in the sun.  Carnauba wax is a great way to go or for clients looking for a wetter shine, Butter Wet wax delivers a wet premium shine.  If applying with a buffer glazes delivery better surface lubricity, hence allowing the buffer to glide easily across the surface bringing about a polished mirror finish and also removing final and hardly noticeable imperfections step “4” may have missed. Glazes will not harden as easy and wax and often times will deliver a deeper shine.

6.         Sealants- To achieve optimal protection and durability select a proper sealant for the job. Magic Seal delivers a premium protective layer that will last 2-6 months, Extreme Top-Coat Sealant is the only Amino Functional Resin with 3XCarnuba.  A Superior formulation delivering unmatched protection coupled with unparalleled shine achieve only through Chemical Guys unique emulsion of carnauba wax and protective qualities acquired from Amino Functional resins.

7.         Follow Up- A quick shine can be achieved through the use of Spray wax or Carnauba Quick Shine Waterless Carwash. These two quick detail sprays can also be used after any of the above 6 steps to remove left over product or as a quick surface cleaner in-between steps.