I am afraid of change and fear progress,  why should I consider using a clay bar or CLAYBLOCK®?

• fast and easy way to safely and easily removes rail dust, water spots, tar, bugs, and paint overspray from automotive paint and glass surfaces

• will not strip or remove wax or sealant protection

• no harsh abrasives that scratch

• no mess nothing to stick to your hand, no kneading required

• 1 bar will do 15-25 full size vehicles

• easy to work with and clean up

As a Quick Detail or Maintenance Spray:

1. When using in very hot direct sunlight always mist on towel not surface, this will eliminate a hot surface from drying the product before you have an opportunity to even touch it with a towel.

2. Simply mist on towel or surface.

3. For the best results, use a microfiber towels to attract dust and minimize the risk of scratching.

4. Do not use the same towel on your paint and glass that you have used on your wheels. and wipe off with clean towel or micro fiber.

5. Mist after washing, while drying or anytime to for a fast dry with a superior shine.

6. Excellent when sprayed on towel and used to remove crème or paste waxes that have hardened.

7. Superior surface shine when used as a final cleaner to remove smudges or smears left behind from waxing or sealing.

As a Clay Bar Lubricant:

1. Wash surface well with Premium Citrus Wagh & Gloss shampoo prior to claying a surface

2. Shake well. Work in areas about the size of a car door or half the hood.

3. Generously Spray a light mist over clean surface,

4. The objective is to keep the paint surface and clay well lubricated with the liquid detailer so the bar picks up the embedded debris in your paint but yet can still glide smoothly across the surface without the risk of scratching the surface.

5. Continue lightly rubbing the clay over the surface until it moves freely

6. Occasionally wipe off any residue with a towel and proceed to the next areas.

7. If clay is hard to move or appears to resist easy wipe off, re-mist the cleaned area, then spray lubricant liberally over surface.

8. For deeper cleaning when clay barring, only use Clay lube and never shampoo and water. This will extend the life of your clay bar as well as offer superior surface lubricity providing a nice slick surface for the clay to slide across.

HOW DOES IT WORK AND WHAT STEPS DO I NEED TO FOLLOW?

1. Wash vehicle very well to loosen surface dirt.  Getting the surface as clean as possible will reduce wear on the clay bar and extend the life of your bar by reducing the amount of contaminants that need to be lifted by CLAYBLOCK®

2. Mist a 2 x2 square foot area generously with LUBER and spray down CLAYBLOCK® as well. . Hold CLAYBLOCK® against the surface and glide it back and forth.

3. CLAYBLOCK® may grab the surface initially. This grabbing indicates that the CLAYBLOCK® is encountering contamination so keep it very well lubed with LUBER.. Continue rubbing gently until CLAYBLOCK® glides freely.

4. Occasionally check CLAYBLOCK® for heavy contaminants that may be stuck onto bar, you may want to spray LUBER onto CLAYBLOCK® or rinse clayblock clean under water prior to every use or if dirty.

5. Using LUBER occasionally spray surface down and Wipe each section with a micro fiber towel, this process will wipe away contaminates and reduce friction and possible marring of surface through friction.

WOW on this Ford F150 we did you can not only feel the difference but actually see it as well.....NICE,

6. Once you have CLAYBLOCK®ed the Paint, YOU CAN CLAYBLOCK® THE WINDOWS AS WELL. Follow the same directions for windows this will reduce streaking when using your wipers and accelerate water runoff when it rains.

7. Wash Vehicle again once completed, this will assure that all contaminates that were removed are safely washed off of the surface where they can no longer to hard to paint.