MARINE AND BOAT HEAVY DUTY WATER SPOT
REMOVER GEL 470ml
Why Buy This Product?
- Removes heavy water spots
- Restores like-new appearance
- Works on fiberglass, gel coat, metal, glass, and more
- Quickly removes saltwater and freshwater spots
How It Works
Chemical Guys Boat Heavy Duty Water Spot Remover Gel erases heavy water spots from boats and watercraft. Water spots are dried minerals left over after a droplet of water evaporates. Without treatment, these minerals can permanently stain and etch into paint, fiberglass, gelcoat, metal, glass, and plastic surfaces. Boat Heavy Duty Water Spot Remover Gel uses advanced technology to neutralize water spot minerals and remove them off the surface. Use Boat Water Spot Remover Gel to clean water spots from hulls, decks, walls, masts, windows, painted surfaces, fiberglass, gel coat, metal, and more. Boat Heavy Duty Water Spot Remover Gel removes water spots to restore the surface to like-new condition and appearance. Boat Heavy Duty Water Spot Remover gel prepares the surface for a fresh coat of Chemical Guys Marine Sealant or Wax for the best protection against the elements. Erase water spots quickly and easily with Chemical Guys Boat Heavy Duty Water Spot Remover Gel.
Removes Heavy Duty Water Spots
Heavy Duty Water Spot Remover Gel takes down heavy water spots from seawater and industrial pollution. Water spots are actually dried up minerals left behind after a droplet of water evaporates. Salt, minerals, oil, and other ocean pollutants dry up and evaporate from marine surfaces, leaving behind corrosive spots and residue. Without treatment, these minerals and chemicals can etch into the surface and cause permanent damage that cannot be washed off. Etched water spots must be sanded and polished away, so take down the heavy mineral stains with Chemical Guys Heavy Duty Water Spot Remover Gel before they can damage your boat’s fine finish.
Works On All Marine Surfaces
Water spots plague any part of your boat that is not properly sealed and maintained. Use Heavy Duty Water Spot Remover Gel to neutralize spots of contamination from paint, clear coat, fiberglass, gel coat, polished metal, glass, plastic, and more. Windows and portholes are especially susceptible to water spot contamination. Use Heavy Duty Water Spot Remover Gel to clean off the intense buildup, then seal and protect those surfaces from future contamination with Boat Wet Wax. Heavy Duty Water Spot Remover Gel will not damage or etch any watercraft surface.
Advanced Chemistry; Safe For Environment
Heavy Duty Water Spot Remover Gel is the perfect solution to remove heavy water spots from boats and watercraft. The water spot remover is safe for marine life. The innovative chemistry quickly breaks down the toughest water spots. Saltwater spots are often extremely difficult to completely remove from boat and watercraft surfaces. The salt content bonds to the pores of gelcoat, fiberglass, and plastic to create a stain that ruins the appearance of your boat. Heavy Duty Water Spot Remover Gel quickly removes the salt contamination to restore a smooth surface that is free of stains and spots. The fast-acting gel removes water spots with minimal effort. Can be used on multiple surfaces including plexiglass, paint, gelcoat, fiberglass,chrome, aluminum, and much more.
More Product Videos
|How To Use:|
- Shake well.
- Clean surface before application.
- Apply a small amount of gel to microfiber applicator pad and scrub surface in straight lines.
- Clean a 2’x2’ area at a time.
- Buff off excess, then neutralize gel with soap and water or detail spray before moving on to next area.
- Follow up with Boat Wet Wax for best protection against future water spots.