Home > NEW PRODUCTS >

PHASE 5 RESTORES AND REVIVES FIBERGLASS (470 ml)
GAP_114_16
 
Our Price: $25.00
Sale Price: $21.95
You save $3.05!

Stock Status:In Stock
Product Code: GAP_114_16
Qty:

Description
 

Phase 5 Fiberglass Polish is an all-in-one scratch and swirl remover that cuts away deep swirl marks and scratches,
then restores a mirror shine to fiberglass and gel coat finishes in one step.

Use This Polish To:

  • Compound and polish in one easy step
  • Achieve the highest level of optical clarity
  • Save time and money with a one step
  • Restore a perfect finish in less time
  • Polish in just one pass

Combines Multiple Steps Into One

When fiberglass does get scratched, swirled, and faded from UV solar rays, it needs a tough compound to remove swirls and marks that mar the finish. Phase 5 uses a hybrid abrasive compound to cut away deep swirl marks and scratches, then refine the finish to restore deep gloss, pure reflection, and brilliant shine.


Dual Action Polisher

  1. Shake well and apply 4-5 drops to desired pad.
  2. Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
  3. Turn on machine on paint to speed setting 1 to spread product.
  4. Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
  5. Follow with light pressure to finish.
  6. Remove residue with a clean microfiber towel.
  7. Please Note: Always try a test spot before use.

Rotary Polisher

  1. Shake well and apply 4-5 drops to desired pad.
  2. Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
  3. Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product.
  4. Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
  5. For final pass adjust speed setting to between 1200-1800 rpms.
  6. Work until optical clarity is achieved.
  7. Remove residue with clean microfiber cloth.

No Fillers For Real Results

When fiberglass does get scratched, swirled, and faded from UV solar rays, it needs a tough compound to remove swirls and marks that mar the finish. Phase 5 uses a hybrid abrasive compound to cut away deep swirl marks and scratches, then refine the finish to restore deep gloss, pure reflection, and brilliant shine without filling in or hiding swirls, scratches, or defects.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

NEW PRODUCTS
Polishes, Pre-Wax & Surface Preparation
MARINE
EXTERIOR > Compounds & Polishes
EXTERIOR